| View previous topic :: View next topic |
| Author |
Message |
DaveEdge
Joined: 03 Nov 2011
Posts: 1
|
 Posted: Thu Nov 03, 2011 12:27 pm Post subject: Front end vibration/wobble when turning and accelerating |
  |
|
Got a very annoying problem.
My 9-3 front end vibrates/wobbles when turning LEFT and when I'm accelerating past 40mph, when I'm turning right I dont get the wobble
I thought it might have been a CV joint/Tri pod bearing but I've had the whole passenger side driveshaft replaced and its still there.
I have been told that there is "excessive" play when the driveshafts are connected?
So after reading other peoples issues I'm assuming it could be a diff bush or bearing? The gearbox doesnt leak any oil.
Has anybody got any suggestions? I've been told by a few people that it could be a wheel problem, but with it only happening when turning left/going over a certain speed I'm thinking its more of a mechanical problem?
Any help/info appreciated. |
|
| Back to top |
|
 |
protech5
Site Admin
Joined: 07 Aug 2007
Posts: 1418
|
| Posted: Mon Jan 16, 2012 1:37 am Post subject: Re: Front end vibration/wobble when turning and accelerating |
|
|
| Inner driver or outer cv joint |
|
| Back to top |
|
|
mcjs
Joined: 17 Jan 2013
Posts: 1
|
| Posted: Thu Jan 17, 2013 1:06 am Post subject: Re: Front end vibration/wobble when turning and accelerating |
|
|
| I have the same issue and a repair shop is telling me it is the motor mounts, they want to repace all three motor mounts. |
|
| Back to top |
|
|
protech5
Site Admin
Joined: 07 Aug 2007
Posts: 1418
|
| Posted: Fri Jan 18, 2013 9:54 am Post subject: Re: Front end vibration/wobble when turning and accelerating |
|
|
| It won't be the mounts. It would've the diff bushing or something in the balance chain area I wold bet. |
|
| Back to top |
|
|
|
