[9000]
| STEP 1 | Push the passenger seat all the way back |
| STEP 2 | Remove the glove blox screws at its bottom and open |
| STEP 3 | Remove the upper screws from the glove box |
| STEP 4 | Remove the cooling hose that cools the glove box |
| STEP 5 | Remove the passenger noise insulation |
| STEP 6 | Remove the lower air duct and pull it out from the glove box opening |
| STEP 7 | Remove the connector for the fan controller
|
| STEP 8 | Remove the fan housing cooling hose |
| STEP 9 | Remove the clips holding the lower section of the fan housing |
| STEP 10 | Pull the housing down and remove the fan |
|