[95]
Removal of 6 Cylinder thermostat
| STEP 2 | Remove Front skid plate cover under car (center one) |
| STEP 3 | Open coolant reservoir (WARNING IF HOT LET COOL OFF!) |
| STEP 5 | Lower car back to ground |
| STEP 6 | Remove upper engine cover, upper intake, mid intake & lower intake (15 ftlb torque) |
| STEP 7 | Remove air mass sensor and hose to intake |
| STEP 8 | Remove & move the turbo pipe out of the way |
| STEP 9 | Remove the dipstick thermostat pipe |
| STEP 10 | Remove the thermostat housing & thermostat (14.7 ftlb torque) |
 Thanks to Warren for contributing to this FAQ!
Note: the thermostat and sensor is located on the driver side under the air plenum. You will need either the intake manifold gasket kit or intake
manifold gasket itself.
Pricing for Thermostat Kits & Related (Heating & Cooling System) |
