[95]
Removal of V6 Starter
| STEP 1 | Remove the battery and cover (you will need the radio code after re-installed) |
| STEP 2 | Remove the Air pump check valve |
| STEP 3 | Remove the rear Air injection hose from the exhaust manifold |
| STEP 4 | Remove the starter wiring connector & bracket above the starter |
| STEP 5 | Lift up the car & remove the serpentine belt cover |
| STEP 6 | Remove the alternator power connector |
| STEP 7 | Unplug the Oil pressure sensor wiring |
| STEP 8 | Remove the wiring clip that secures the wiring to the alternator |
| STEP 9 | Remove the starter wiring plug |
| STEP 10 | Remove the lower starter motor bolt & lower the car back down |
| STEP 11 | Slide the wiring away from the starter |
| STEP 12 | Remove top starter bolt & lift out starter between the exhaust manifold & false bulkhead |
Pricing for Starters (Starters) |