[95]
| STEP 1 | Lift the front end so the wheels are off the floor |
| STEP 2 | Remove the airmass meter hose and move to the side |
| STEP 3 | Remove the steering hose from the engine mount |
| STEP 4 | Loosen the belt pulley bolts and remove the tension from the belt |
| STEP 5 | Remove the belt pulley and the upper engine cover |
| STEP 6 | Remove the bypass pipe to the turbo and move it to the side |
| STEP 7 | Remove the exhaust shield |
| STEP 8 | Remove the crankcase pipe from the cylinder head to the turbo intake pipe |
| STEP 9 | At this point you can pinch the hoses if you prefer to not have major leaks |
| STEP 10 | Disconnect the inlet hose from the steering pump and put it in a suitable container |
| STEP 11 | Open the filler cap to relieve pressure (you can remove the dipstick as well) |
| STEP 12 | Remove the bracket for the fluid pipe and remove it from the engine |
| STEP 13 | Remove the bracket that secures the pump by removing the 3 bolts |
Pricing for Power Steering Pump (Steering & Related) |
