| [95]
This info applies to the door trim for both front & rear doors
Remove the curved decor strip on the door frame. The strip should be attached with clips
Unplug the connector for the door mirror adjustment.
Remove the inside door handle and the cover piece and screw
Remove the door pull & the 2 cover pieces and screws
Remove the door trim that is attached with clips. Use a screwdriver to undo the clips along the edge
Remove the molding using a screwdriver
Remove the door trim away from the lock button
Remove the door lamp from the trim
Unplug and mark all connectors so you will know where they need to go back to
Refit in Reverse
|