| [900 94-98]
Raise the car & Remove both spoiler skirts.
Remove the wing liners from the rear of the bumpers & lower the car
Open the Hood & Remove the grille
Move the headlamp wiper arms away from the headlamps and disconnect the washer hose Clips that hold the hose
Remove the right and left headlamps and turn signals
Remove the two bolts securing the bumper to the car body
Cut the cable ties that hold fog light wiring and unplug their connectors.
Unplug the temperature sensor connector located in the middle of the bumper.
The sensor cable is held in place on the inside of the bumper by means of insulating tape.
Lift the bumper away by pulling it forward so that it comes free from the brackets in wing and front.
When replacing your bumper transfer the spoiler and number plate as well as the spoiler skirts to the new bumper
Pricing for Bumper Covers Front & Related (Body External) |