| [900 94-98]
Distributor removal
Remove Distributor cap and unplug Hall sensor connections
Remove distributor bolt
Remove distributor
Re-install by rotating the distributor shaft until the drive opening at the rear of the distributor is in the camshaft slot
Rotor Button removal
Remove the distributor cap
Remove the rotor button by crushing it with a pair of pliers the base of the rotor button but remove ALL broken pieces and make sure none of the crushed pieces fall into the distributor
Re-install and use Loctite 601 or similar glue
Pricing for Distributor & Related (Ignition & Related)
Pricing for Distributor Cap (Ignition & Related)
Pricing for Distributor Rotor Button (Ignition & Related) |