| [900 94-98]
Rear Wheel Hub/bearing removal
Lift up the car & remove the rear wheel
Remove the caliper retaining spring
Remove the allen bolt covers that hold the caliper on & remove the bolts
Suspend the caliper with the brake pipe hook. Be careful not to damage the line
Make sure the brake pipe is not damaged
Remove the outer brake pad
Remove the brake caliper holder
Remove the brake disc
Remove the wheel sensor connector
Remove the hub and the brake shield
Refit in Reverse Tightening torque for new nut is 50 Nm +300 (40 ft lb +30 degrees) & 7 ft lb for the sensor
Pricing for Rear Wheel Bearings & Related (Wheel Bearings & Related) | 