[93 98-03]
Lock Cylinder Replacement
| STEP 1 | Remove the driver seat and side covers of the center console.
|
| STEP 2 | Remove the air duct and put shifter in 4th gear (automatic Transmission)
|
| STEP 3 | Remove the shifter rod clamp at the gearbox. |
| STEP 4 | Remove the screws that hold down the gear shifter housing and turn on its side. |
| STEP 5 | Cut tie wraps to free wires from shifter housing. (passenger side of housing) |
| STEP 6 | Turn shifter housing bottom up & unclip electrical plug from ignition switch. |
| STEP 7 | Remove Torx screws from ignition switch & switch will come out of shifter housing.
|
| STEP 8 | Turn key in any "on" position. |
| STEP 9 | With flat head screw driver. Push tab on side of ignition switch and tug on key. Should separate. |
| STEP 10 | Re-install in reverse order. |
Pricing for Ignition Switch & Related (Ignition & Related) |
