Ball Joint Dust Cover Removal

[Saab 900 2.0T, 900 2.3NT, 900 2.5i, 93 2.0T (not sedan), 93 2.3NT, 93 2.3T Viggen]

STEP 1

Ball joint dust cover on the suspension arm

STEP 2

Lift up the car & remove the wheel

STEP 3

Remove the bolt holding the suspension arm to the steering knuckle

STEP 4

Compress the suspension arm and hold by placing wedge between the arm and the sway bar

STEP 5

Remove the upper lock ring by pulling with a screwdriver between the ring and the dust cover

STEP 6

Remove the lower lock ring in the same manner

STEP 7

Refit in reverse