BELT REPLACEMENT V6

[95]

1. Raise Car and drape a cover over the fender to avoid scratching the fender
2. Remove the passenger spoiler sections
3. Insert Wedges (part # 8395238 call Saab to purchase 8774177222) between the oil pan and sub frame
4. Lower the car and remove the Mass Air Meter hose tubing
5. Remove the Power steer hose bracket screw in order to facilitate belt removal
6. Remove the right engine mount and bracket (installation Torque is 46.5 foot lbs)
7. Remove the belt by releasing the tension on the 4750220 by turning the center bolt to the right. Be careful to not allow it to slap back or it could break. See photo below for belt setup and click the photo to enlarge it.

Pricing for Belt & Pulley Setup V6 (Belts & Pulleys)

Back to 95 FAQs

Contribute Info to this FAQ