Bumper Removal Front

[Saab 93]

STEP 1

Raise the car & Remove both spoiler skirts.

STEP 2

Remove the wing liners from the rear of the bumpers & lower the car

STEP 3

Open the Hood & Remove the grille

STEP 4

Move the headlamp wiper arms away from the headlamps and disconnect the washer hose Clips that hold the hose

STEP 5

Remove the right and left headlamps and turn signals

STEP 6

Remove the two bolts securing the bumper to the car body

STEP 7

Cut the cable ties that hold fog light wiring and unplug their connectors.

STEP 8

Unplug the temperature sensor connector located in the middle of the bumper.

STEP 9

The sensor cable is held in place on the inside of the bumper by means of insulating tape.

STEP 10

Lift the bumper away by pulling it forward so that it comes free from the brackets in wing and front.

STEP 11

When replacing your bumper transfer the spoiler and number plate as well as the spoiler skirts to the new bumper