[93 98-03, 900 94-98]
| STEP 1 | Release the coolant reservoir cap to relieve pressure & raise the car & drain the coolant |
| STEP 2 | Remove the coolant hose from the turbo & remove the pipe from the turbo |
| STEP 3 | Close the drain plug & lower the car |
| STEP 4 | Remove the hose between the air collector and intake turbo pipe |
| STEP 5 | Cut the cable ties securing the main engine cable |
| STEP 6 | Release pressure on the belt tensioner with a ratchet handle with a drill bit or screwdriver & remove belt |
| STEP 7 | Remove the top engine cover |
| STEP 8 | Remove the crankcase pipe from the turbo inlet & valve cover & move pipe to one side |
| STEP 9 | Unplug the turbo Solenoid & remove the hoses |
| STEP 10 | Remove the engine lifting eye |
| STEP 11 | Remove the turbo bypass valve being careful to keep the turbo intake o'ring |
| STEP 12 | Remove exhaust manifold heat shield & detach the vent hose |
| STEP 13 | Remove the turbo intake pipe and plug it to make sure that nothing gets in either parts |
| STEP 14 | Remove the steering pump bolt on the right side behind the pump pulley |
| STEP 15 | Remove the steering pump bolt & lift up the pump to access the 2 upper bolts on the bracket |
| STEP 16 | Secure the pump once loose with a tie strap |
| STEP 17 | Remove the coolant hoses from the water pump inlet |
| STEP 18 | Remove the two coolant pipes from the block & the ones to the water pump (careful to keep o'ring) |
| STEP 19 | Loosen the water pump slightly and remove the pipe |
| STEP 20 | Remove the water pumps 3 bolts & wiggle the pump away from the block adapter |
| STEP 21 | Inspect the block adapter for corrosion and replace the o'ring. |
| STEP 22 | Replace the water pump and reassemble in reverse order |
Pricing for 900 94-98 Water Pumps & Related (Heating & Cooling System)
Pricing for 93 98-03 Water Pumps & Related (Heating & Cooling System) |
