[93 03-07]
Throttle Body Replacement
Step 1 Remove the top engine cover.
Step 2 Take off the turbocharger delivery hose from the throttle body and put it aside.
Step 3 Carefully bend up the bracket catch and remove the EVAP canister purge valve from the bracket.
Step 4 Remove the bracket from the throttle body and carefully put it aside.
Step 5 Unplug the connector from the throttle body.
Step 6 Remove the throttle body.
Step 7 Remove the old seal and clean the sealing surfaces.
Installation of Throttle Body
Step 8 Install the throttle body with a new seal.
Step 9 Plug back the connector on to the throttle body.
Step 10 Install the bracket.
Step 11 Install the EVAP canister purge valve and bend the bracket back into place.
Step 12 Install the turbocharger delivery hose back to the throttle body.
Step 13 Install the Engine Cover
Pricing for Throttle Body For Traction Control (Electrical Components) | 