WATER PUMP REMOVAL "H" ENGINE

[900 79-94]

STEP 1

Remove the belt off the AC compressor. Remove or loosen the 4 10mm bolts in the water pump pulley.

STEP 2

Remove the alternator belts. You will want to remove the 18 mm nut on the back of the alternator adjusting screw and remove the adjusting screw to pull the alternator over to the compressor bracket to facilitate removal of the belts

STEP 3

Now that you have the belts and pulley off remove the 6 12mm bolts from the water pump and push down on it from the top to remove. There are guys that say removing the compressor makes this job easier and the could be correct. I personally don't take the compressor off. I just use a razor blade and a mirror with a light. I remove the old gasket that way. Be careful if you decide to use a wiz wheel as you can groove the timing cover when trying to clean the gasket.

STEP 4

I use cooper gasket spray to make the water pump gasket seal to the water pump and timing cover

STEP 5

Refit in reverse order

Pricing for Water Pumps & Related (Heating & Cooling System)

Back to 900 79-94 FAQs

Contribute Info to this FAQ