POWER STEERING PUMP REPLACEMENT V6
| STEP 1 | Drain the fluid from the pump. Connect a length of hose to the return pipe and place the other end in a bottle or similar receptacle that holds at least one liter. Start the engine and allow the hydraulic fluid to be pumped out of the steering gear. Turn the steering wheel from full lock to full lock. Switch off the engine when no more fluid runs out into the bottle. Don't allow the pump to run dry.hose and reconnect the return hose |
| STEP 2 | Remove the hose and reconnect the return hose |
| STEP 3 | Remove the air cleaner |
| STEP 4 | Remove the belt and pump pulley |
| STEP 5 | Remove the flow pipe |
| STEP 6 | Remove the Suction pipe |
| STEP 7 | Undo the retaining bolts and remove the pump |
| STEP 8 | Refit in reverse |
 | NOTE: This job should be done by a qualified professional only and should not be attempted by those not authorized to do so!!!! |